Troubleshooting - Heinner HWM-5080VA++ Manual

www.heinner.com
XI. TROUBLESHOOTING
All repairing operations required for your machine should be carried out by our authorized
service. If your machine requires a repair or if you cannot remove the fault by the help of the
information provided as follows:
•
Unplug your machine.
•
Turn the water faucet off.
FAULT
Your machine does not start.
Your machine does not intake
water.
Your machine does not
discharge water.
POSSIBLE CAUSE
It is not plugged.
Fuses out of order.
Electricity cut-off.
Start/Pause button not
pressed.
Programme dial 'stop'
position.
The machine door is not
completely closed.
Water tap is turned off.
Water inlet hose may be
twisted.
Water inlet hose clogged.
Valve inlet filter clogged.
The machine door not
completely closed.
Discharging hose
clogged or
twisted.
Pump filter
clogged.
Laundries settled in
the machine non-
homogeneously.
5Kg, 220-240V~50Hz, 800rpm
TROUBLE- SHOOTING
Plug machine in.
Replace the fuses.
Check mains power.
Press on Start/ Pause button.
Switch the programme button to the
desired position.
Close the machine door.
Turn your faucet on.
Check water inlet hose and untwist.
Clean water inlet hose filters.
Clean the valve inlet filters.
Close the machine door.
Check the discharging hose, then either
clean or untwist.
Clean the pump filter.
Spread your laundry in the machine
evenly.
33