Adding Detergent Into Machine - Heinner HWM-5080VA++ Manual

www.heinner.com

ADDING DETERGENT INTO MACHINE

The amount of detergent you will put in your machine will depend on the following
criteria:
• Your detergent utilization will be based on the degree of contamination of your laundries.
Do not prewash your less stained laundries and put your slight amount of detergent in
the 2nd compartment of the detergent drawer.
• For your much stained laundries, select a programme including prewashing, and put ¼ of
the detergent you will put in the detergent drawer in the 1st compartment of the
detergent drawer while putting the remaining ¾ of it into 2nd compartment.
• Use detergents produced for automatic washing machine in your machine. The amount
of detergent you will use for your laundries is printed on the detergent package.
• The higher the degree of hardness of the water the more detergent you will use.
• The amount of the detergent you will use will increase as the amount of your laundries
increase.
• Put the softener in the softener compartment in the detergent drawer. Do not exceed
the MAX level. Otherwise, sof- tener will flow into washing water through flushing.
• Softeners with high density are required to be thinned to a degree before being put in
the drawer. Because high-density softener will clog the flush and avoid the flow of the
softener.
• You can use your liquid detergents in all programs without prewashing. For this, fit liquid
detergent level plate in the ac- cessories bag or the liquid detergent apparatus (*) into
2nd compartment of the detergent drawer and set the amount of liquid detergent
according to the levels on this plate. Remember to detach the liquid detergent plate.
5Kg, 220-240V~50Hz, 800rpm
20