Heinner HWM-5080VA++ Manual page 10

www.heinner.com 5Kg, 220-240V~50Hz, 800rpm
ADJUSTMENT
Do not install your machine on a carpet or such grounds that would prevent the ventilation
of its base. To ensure silent and vibration-free operation of your machine, it should be
deployed on a non-sliding and firm ground. You can adjust the balance of your machine
through the stays. Loosen the plastic adjustment nut.
Adjust the stays upward and downward by rotating them.
After maintaining the balance, compress the plastic adjustment nut upward again.
Never put cardboard, wood or suchlike materials under your machine if you are intending
to stabilize the distortions on the ground.
When cleaning the ground, on which your machine rests, be careful not to disorder stays
stabilization.
9