Table of Contents
Advertisement
Available languages
Available languages
www.heinner.com
FAULT
Your machine
vibrates.
Excessive foam is
formed in the detergent
drawer.
POSSIBLE CAUSE
The feet of your machine
have not been adjusted.
Safety stays fitted for
transportation not
disassembled.
Less amount of laundry in the
appliance.
Your machine is over- loaded
with laundry or laundry
settled unevenly.
Your machine rests
on a hard surface.
Excessive amount of
detergent used.
Wrong detergent used.
5Kg, 220-240V~50Hz, 800rpm
TROUBLE- SHOOTING
Adjust the feet on your machine.
Disassemble the safety stays of your
machine.
This will not block operation of your
machine.
Do not put in laundry more than the
amount recommended and settle
the laundry in the machine evenly
Prevent your machine from resting
on hard surfaces.
Press on Start/Pause button. To
eliminate foam formation, mix a spoon
of softener with half
litres of water, and pour the mixture in
the detergent drawer. After 5-10
minutes, Press on Start/ Pause button
again. In your next washing operation,
Adjust the detergent dose accordingly.
Use detergents produced only for
automatic washing machines in your
machine.
34
Hide quick links:
Advertisement
Table of Contents
