Troubleshooting - Heinner HWM-V8414SD+++ User Manual

www.heinner.com
XIII. TROUBLESHOOTING
All repairing operations required for your machine should be carried out by our authorised
service. If your machine requires a repair or if you cannot remove the fault by the help of the
information provided as follows:
•
Unplug your machine.
•
Turn the water faucet off.
FAULT POSSIBLE CAUSE
Your machine does not It is not plugged.
start.
Fuses out of order.
Electricity cut-off.
Start/Pause button not pressed.
Programme dial 'stop' position.
The machine door is not completely
closed.
Your machine does not Water tap is turned off.
intake water.
Water inlet hose may be twisted.
Water inlet hose clogged.
Valve inlet filter clogged.
The machine door not completely closed. Close the machine door.
Your machine does not
Discharging hose clogged or
discharge water.
twisted.
Pump filter clogged.
Laundries settled in the machine
non- homogeneously.
8Kg, 220-240V~50Hz, 1400rpm
TROUBLE- SHOOTING
Plug machine in.
Replace the fuses.
Check mains power.
Press on Start/ Pause button.
Switch the programme button to the
desired position.
Close the machine door.
Turn your faucet on.
Check water inlet hose and untwist.
Clean water inlet hose filters.
Clean the valve inlet filters.
Check the discharging hose, then
either clean or untwist.
Clean the pump filter.
Spread your laundry in the machine
evenly.
35