Wet Mopping - Tesla RoboStar T30 User Manual

control display (HH:MM) to set the start for the schedule cleaning.
 Press the button again to confirm the "Scheduled Cleaning".
4. The "CLOCK" (6) button

Enter the "Time Setting" mode, use the directional buttons (HH:MM).
 Press the button again to confirm the set time.
5. The "HOME" (8) button

Press to command the vacuum cleaner to search for the charging station and start charging.
6. The "SPIRAL" (3) button
 Press to command the vacuum cleaner to start cleaning in circles - targeted cleaning.
7. The "PERIMETER" (7) button
 Press to command the vacuum cleaner to start cleaning along the walls
(put the vacuum cleaner near the wall, aprox. 10 cm).

WET MOPPING

Attach the mopping pad with the mop on the vacuum cleaner, use the two installation holes "M"
on the bottom of the vacuum cleaner.
Remove the plastic cover and fill the plastic container with water. Lightly moisten the mop for
faster and smoother wiping. We recommend that the floor be wiped with clean water, the
detergent may cause foam to soften water dripping on the mop, or cause smudges on the floor
after drying.
If the mop is dirty after cleaning, you can clean it with lukewarm water. When removing the mop
from the holder, make sure you do not damage the velcro fastener on the bracket quickly.