Wet Mopping - Tesla RoboStar T10 Manual

control display (HH: MM) to set the start for the schedule cleaning.
 Press the button again to confirm the "Scheduled Cleaning".
4. The "CLOCK" (6) button

Enter the "Time Setting" mode, use the directional buttons (HH: MM).
 Press the button again to confirm the set time.
5. The "HOME" (8) button

Press to command the vacuum cleaner to search for the charging station and start charging.
6. The "SPIRAL" (3) button
 Press to command the vacuum cleaner to start cleaning in circles - targeted cleaning.
7. The "PERIMETER" (7) button
 Press to command the vacuum cleaner to start cleaning along the walls (put the vacuum
cleaner near the wall, aprox. 10 cm).
DRY MOPPING

To remove fine dust and polish the floor.
 Attach the mopping pad with the mop on the vacuum cleaner, use the two installation holes
"M" on the bottom of the vacuum cleaner.
 Do not use the microfiber cloth for mopping uneven surfaces or carpets.

WET MOPPING

(OPTIONAL - water tank for water mopping IS NOT included in package)
Attach the mopping pad with the mop on the vacuum cleaner, use the two installation holes "M"
on the bottom of the vacuum cleaner.
Open the plastic cap and take the water into the plastic water tank. We recommend that the floor
be wiped with clean water, the detergent may cause foam to soften water dripping on the mop, or
cause smudges on the floor after drying.