Installation - Electrolux EOC6P71X User Manual

40 www.electrolux.com
Problem
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
The display shows "12.00". There was a power cut.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. INSTALLATION

WARNING!
Refer to Safety chapters.
Possible cause
The demo mode is activa‐
ted.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
1. Deactivate the oven.
2. Press and hold at the
same time
.
3. The first digit on the
display and Demo indi‐
cator start to blink.
4. Enter the code 2468 by
turning the knob for the
temperature right or left
to change the values
and press to con‐
firm.
5. The next digit starts to
blink.
6. Demo mode deacti‐
vates when you con‐
firm the last digit and
the code is correct.
Reset the clock.