Electrolux EOC6P71X User Manual page 14

14 www.electrolux.com
flashes, you can use the knob for the
temperature to change the default
core temperature.
The display shows the symbol of the
core temperature sensor and the default
core temperature.
4. Press
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor
core temperature flash. The signal
sounds for 2 minutes.
5. Press any button or open the oven
door to stop the signal.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the oven.
7. Turn off the oven.
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
Every time you put the core temperature
sensor in the socket, you need to set the
core temperature time again. You cannot
select the duration and end time.
When the oven calculates the provisional
duration time for the first time, the symbol
flashes in the display. When the
calculation ends, the display shows the
duration of the cooking. Calculations run
in the background during the cooking
and the duration value in the display is
updated if necessary.
You can change the temperature at any
time during the cooking:
1. Press
• one time - the display shows the
set core temperature; if desired, it
can be modified within 5 seconds.
• two times - the display shows the
current oven temperature.
to save the new core
and the default
:
• three times - the display shows
the set oven temperature; if
desired, it can be modified within
5 seconds. This info is available
only during the heating up phase.
2. Use the knob for the temperature to
change the temperature.
8.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray/ Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and
the wire shelf on the guide bars above.