Electrolux EOC6P71X User Manual page 39

Problem
The display shows an error
code that is not in this ta‐
ble.
There is water inside the
oven.
The indicator "Tank Full"
is off.
The indicator "Tank Empty"
is on.
The steam cooking does
not work.
The steam cooking does
not work.
It takes more than three
minutes to empty the water
tank or the water leaks
from the steam inlet open‐
ing.
Possible cause
There is an electrical fault.
There is too much water in
the tank.
There is not enough water
in the tank.
There is no water in the
tank.
Lime obstructs the hole.
There is no water in the
tank.
There are lime deposits in
the oven.
ENGLISH
Remedy
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Deactivate the oven and
wipe the water with a cloth
or sponge.
Fill the tank with water until
the indicator comes on. If
water starts to come out in‐
side the oven, and the indi‐
cator is still off, contact a
qualified service engineer.
Fill the tank. If the indicator
is still on, contact a quali‐
fied service engineer.
Check the steam inlet
opening. Remove the lime.
Fill the water tank.
Clean the water tank. Re‐
fer to "Cleaning the water
tank".
39