The Dishwashing Results Are Not Satisfactory - Hanseatic HGTI6082D137709HS User Manual

Page EN-38

The dishwashing results are not satisfactory

Problem
There are residues
or streaks on the
dishes.
The dishes are not
completely clean.
Possible cause
The rinse aid is incorrectly
dosed.
The dishwasher salt is
depleted.
The dishwasher salt is
clumpy.
There are food scraps which
are encrusted onto the dish-
es.
The dishes have not been
stacked optimally.
You have selected the in-
correct dishwashing pro-
gramme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too
low.
The spraying arm can not
rotate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Troubleshooting table
Solution
Adjust the dispensed dose (see
„Changing the rinse aid dose" on
page EN-15).
Add dishwasher salt (see „Adding
dishwasher salt" on page EN-16).
Stir the dishwasher salt using the end
of a spoon or similar.
Soak dirty dishes prior to washing the
dishes.
Stack the dishes in such a way that
all parts can be reached by the water
jets (see „Loading the dishwasher" on
page EN-17).
Select the correct dishwashing pro-
gramme (see „Programme table" on
page EN-21).
Use the correct dosage of dishwasher
detergent (see „Programme table" on
page EN-21).
Turn the water tap on completely.
Ensure that no dishes are impeding
the motion of the spraying arm.
Clean the nozzles (see „Checking
and cleaning the spraying arms" on
page EN-27).