Page EN-28
Installation, assembly, connection and initial commissioning
Installation, assembly, connection and initial commissioning
Choose a suitable location
CAUTION!
Risk of injury!
Improper handling of the appliance
may lead to injuries.
The appliance is heavy and bulky. Seek
■
the help of another person during
transport, installation and assembly.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
Risk of electric shock!
Faulty electrical installation or excessive
mains voltage may result in an electric
shock.
Check whether regulations for con-
■
necting dishwashers exist on the
part of the responsible power supply
company.
Ensure that the mains plug is (23)
■
easily accessible after setting up and
installing the dishwasher.
Never use multi-socket adapters,
■
multi-socket strips, travel adapters or
the like.
We recommend using a pulse-sensi-
■
tive residual current device (RCD).
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90°
820 mm
580 mm
Inlet/outlet area
and electrical
connection.
450mm
90°
80 mm
100 mm