Siruba 700KST Instruction Book page 31

上送具與差動齒之關係
當上送具①走至行程最下方時，與差動齒②之
距離為 0.5mm。( 圖 35)
上送具前後行程調整
1. 旋鬆調整旋鈕①，往順時針方向行程越大，
反之行程越小。( 圖 36)
RELATION BETWEEN THE
UPPER FEED DOG AND THE
DIFFERENTIAL FEEDER
When the upper feeder ① moves to the lowest
stroke, the distance from the differential feeder
is 0.5mm. (Fig.35)
ADJUST THE FRONT-REAR
STROKE OF UPPER FEEDER
1. Loosen the adjusting knob ①, the stroke
would be larger when turn the knob
clockwise. The opposite way is to lower
down the stroke. (Fig.36)
Introduction
圖 35 / Fig. 35
圖 36 / Fig. 36
P25