Adjusting Temperature During Heating Mode; Adjusting The Heating Level During Heating Mode; Adjusting The Remaining Operation Time - Webasto SmartControl Operating Instructions Manual

Heating temperature is shown in the display.
Turn the control knob in order to choose the desired
X X
temperature.
Press the control knob in order to confirm selection.
X X
Heating starts functioning.
Menu element "Heating" is shown in the display as well as the
selected heating temperature.
Quick start button shows green light.
5.2.1

Adjusting temperature during heating mode

3
The heater is in the heating mode.
Turn the control knob and choose the desired temperature.
X X
Press the control knob within 5 seconds in order to confirm
X X
selection.
5.2.2

Adjusting the heating level during heating mode

3
Heater with selectable heating levels
3
The heater is in the heating mode.
Press the control knob in order to go from temperature
X X
selection to heating level selection.
Turn the control knob in order to choose the desired heating
X X
level.
Press the control knob within 5 seconds in order to confirm
X X
selection.
5.3

Adjusting the remaining operation time

If a longer remaining operation time is required then a longer remaining
operation time must be set again. One cannot make any changes from the
minimum duration which amounts to 10 minutes. Increasing the operation
time is possible only after switching off and then restarting the device.
Heating
Temperature
13