Settings; General; Altitude Correction (If Available); Setting The Quick Start Button Default Value - Webasto SmartControl Operating Instructions Manual

9

Settings

9.1

General

Choose the menu element "Settings"
Press the control knob.
X X
Turn control knob, choose the desired menu element.
X X
9.2

Altitude correction (if available)

Altitude correction can be switched on when operating certain heaters at higher altitu-
des (>1500 m).
See the operating instructions for the heater.
3
The menu element "Settings" has been chosen.
Press the control knob to select the altitude correction
X X
function.
"Off" option is preset.
Press the control knob to confirm the altitude correction
X X
function.
When altitude correction is active, the altitude correction symbol
top left in the main menu.
The altitude correction function must be switched off manually when it is no longer
required.
9.3

Setting the quick start button default value

Depending on your choice, the quick start button can switch on either ventilation
If altitude correction is available, this is shown as the
first menu point.
Settings
Settings
Quick start
is shown at the
21