Adjusting Temperature During Heating Mode; Adjusting The Heating Level During Heating Mode; Adjusting The Remaining Operation Time - Webasto UniControl Operating Instructions Manual

Heating temperature is shown in the display.
Turn the control knob in order to choose the desired
X X
temperature.
Press the control knob in order to confirm selection.
X X
Heating starts functioning.
Menu element "Heating" is shown in the display as well as the
selected heating temperature.
Quick start button shows green light.
5.2.1

Adjusting temperature during heating mode

3
The heater is in the heating mode.
Turn the control knob and choose the desired temperature.
X X
Press the control knob within 5 seconds in order to confirm
X X
selection.
5.2.2

Adjusting the heating level during heating mode

3
Heater with selectable heating levels
3
The heater is in the heating mode.
Press the control knob in order to go from temperature
X X
selection to heating level selection.
Turn the control knob in order to choose the desired heating
X X
level.
Press the control knob within 5 seconds in order to confirm
X X
selection.
5.3

Adjusting the remaining operation time

If a longer remaining operation time is required then a longer remaining
operation time must be set again. Changes cannot be made for a minimum
duration of 10 minutes. Increasing the operation time is possible only after
switching off and then restarting the device.
Heating
Temperature
12