Advertisement
Quick Links
For Models
Communication
Viking W-1000 Doorbox uses "half-duplex"
communication, allowing for high speaker and
microphone volume, witout the possibility of
feedback.
Intercom to C1000B (Not polarity senitive)
13.8 VAC (from C-1000B)
Red 12+ to Wiegand Controller
Black 12- to Wiegand Controller
Green Data 0 to Wiegand Controller
White Data 1 to Wiegand Controller
Ground/Drain
For Green LED control
For Red LED control
For Site Code Modification
Connect tamper switch to alarm (optional)
Manual Type 6.4.0.5-RF
Viking W-1000 w/C-1000B Controller
and Essex Wiegand Keypad
400-W-VIK
403-W-VIK
410-W-VIK
Specifications
Access Control
Essex KPT-26TI 26 bit Wiegand Keypad
400 Series "W" Junction Board
401-W-VIK
404-W-VIK
411-W-VIK
INSTALLATION
INSTRUCTIONS
501 E. Goetz Ave.
Santa Ana, Ca 92707
www.eholovision.com
Ph. 714-434-6904
Fax 800-362-0002
HOLOVISION
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HOLOVISION 400-W-VIK
Summary of Contents for HOLOVISION 400-W-VIK
- Page 1 INSTALLATION INSTRUCTIONS Manual Type 6.4.0.5-RF Viking W-1000 w/C-1000B Controller and Essex Wiegand Keypad For Models 400-W-VIK 401-W-VIK 403-W-VIK 404-W-VIK 410-W-VIK 411-W-VIK Specifications Communication Access Control Viking W-1000 Doorbox uses “half-duplex” Essex KPT-26TI 26 bit Wiegand Keypad communication, allowing for high speaker and microphone volume, witout the possibility of feedback.
- Page 2 Wiring Diagram for Viking W-1000/C-1000B VIKING Model C-1000B 13.8 VAC 1.25A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 4 5 6 9 10 11 12 13 14 15 16 17 18 19 Incoming CO To Remote Input on Wiegand Controller or to...
- Page 3 Pick up the phone (you will hear a double beep - indicating that you have accessed the PROGRAMMING MODE). You can now Touch Tone program the features listed below. SEE HOLOVISION Programming NOTES. When Finished, hang up and move DIP SWITCH 2 to the OFF position Slide the TALK BATTERY switch back to the OFF position...
- Page 4 HOLOVISION’s Programming Notes Doorstrike Activation Time - Generally the default setting of 1/2 sec is fine. The momentary contact can open a motorized gate, or activate the relay on the “S-12” keypad. For other keypad types this will be changed. Doorbell Mode (*1)- phones will not ring when doorbell is pushed.
Need help?
Do you have a question about the 400-W-VIK and is the answer not in the manual?
Questions and answers