Advertisement
Quick Links
For Models
Communication
Holovision VIO for Crestron RAVA/SIP and SIP
enabled VoIP
Not Used
Not Used
Red 12+ to Wiegand Controller
Black 12- to Wiegand Controller
Green Data 0 to Wiegand Controller
White Data 1 to Wiegand Controller
Ground/Drain
For Green LED control
For Red LED control
For Site Code Modification
Connect tamper switch to alarm (optional)
Manual Type 6.4.0.9-RF
Holovision VIO
with Essex Wiegand Keypad
400-W-VIO
401-W-VIO
403-W-VIO
404-W-VIO
410-W-VIO
411-W-VIO
Specifications
Access Control
Essex KPT-26TI 26 bit Wiegand Keypad
Panasonic Door Phone card has relay out-
puts
400 Series "W" Junction Board
INSTALLATION
INSTRUCTIONS
501 E. Goetz Ave.
Santa Ana, Ca 92707
www.eholovision.com
Ph. 714-434-6904
Fax 800-362-0002
HOLOVISION
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HOLOVISION 401-W-VIO
Summary of Contents for HOLOVISION 401-W-VIO
-
Page 1: Specifications
404-W-VIO 410-W-VIO 411-W-VIO Specifications Access Control Communication Essex KPT-26TI 26 bit Wiegand Keypad Holovision VIO for Crestron RAVA/SIP and SIP Panasonic Door Phone card has relay out- enabled VoIP puts Not Used Not Used Red 12+ to Wiegand Controller Black 12- to Wiegand Controller 501 E. - Page 2 VIO and Weigand Wiring Diagram To Gate or Strike Speaker Microphone From NO Output on Weigand Controller Push Button PoE+ Switch Page 2 Type 6.4.0.9-RF...
- Page 3 VIO RAVA Quick Start 1. Plug the device into the network. Device will speak it’s IP address. 2. Navigate to device IP on a web browser. 3. Under “Configuration” please enter SIP ID for the name to be displayed, and enter the extension of the Main RAVA Touchscreenunder “Input Call ID 0 Default is CALL:CRESTRON”...
- Page 4 5. Configure the relay setting under “Inbound Calls”. Configure the powered relay and the dry contact closure. Choose any 2 to 4 digit combination Note; By configuring the request to exit feature you can configure for either relay. 6. Once the device has been configured you can initiate the call by pressing the button Page 4 Type 6.4.0.9-RF...
- Page 5 & " " " Page 5 Type 6.4.0.9-RF...
- Page 6 Page 6 Type 6.4.0.9-RF...
Need help?
Do you have a question about the 401-W-VIO and is the answer not in the manual?
Questions and answers