D-Link DVG-1402S User Manual page 33

Web-based Management (continued)
Configure LAN Port > Routing > RIP
Select to use RIPv1,
RIPv2 or On (both
versions) for the LAN
and WAN interface.
To disable both
versions of RIP
select Off.
Click Save to save
the settings.
RIP - Routing
Information Protocol
that specifies how
routers exchange
information. With RIP,
routers periodically
exchange entire tables.
Configure LAN Port > Routing > Static Route Configuration
Use Static Routing to
specify a route used
for data traffic within
your WAN or LAN.
This can be used to
specify that all
packets destined for
a particular subnet
use a predetermined
gateway.
Click the edit icon on
the window above to
access the second
Static Route
Configuration
window:
33