D-Link DVG-1402S User Manual page 14

Getting Started (continued)
Connecting the DVG-1402S in Front of a Router
6. Plug the Cat 5 Ethernet Cable from the
Cable/DSL Modem into the "WAN" port of
the DVG-1402S.
7. Unpack the Cat 5 Ethernet Cable (blue) that came with the DVG-1402S.
8. Attach one end of this Cat 5 Ethernet Cable (blue) to one of the four "LAN"
Ports on the rear of the DVG-1402S.
9. Attach the other end of this Cat 5 Ethernet Cable (blue) to the "WAN" port of
your existing router.
10. Be sure that the Cat 5 Ethernet Cable that is plugged into the LAN Port of
your existing router is still plugged into your PC.
11. Unpack the Telephone Cable (black) that
came with the DVG-1402S.
12. Attach one end of this cable to a standard analog telephone.
13. Attach the other end of this cable to phone port "1" on the rear of the DVG-
1402S.
14. Unpack the 12V DC Power Adapter that
came with your DVG-1402S.
15. Connect the Power Adapter to the Power
Connecter on the DVG-1402S.
16. Connect the other end of the Power Adapter
to an available electrical outlet (Wall Socket
or Surge Protector).
14