D-Link DVG-1402S User Manual page 19

Getting Started (continued)
Connecting the DVG-1402S Behind a Router
6. Plug the Cat 5 Ethernet Cable from the PC
into the "LAN" port of the DVG-1402S.
7. Unpack the Cat 5 Ethernet Cable (blue) that came with the DVG-1402S.
8. Attach one end of this Cat 5 Ethernet Cable (blue) to the "WAN" Port on the
rear of the DVG-1402S.
9. Attach the other end of this Cat 5 Ethernet Cable (blue) to the "LAN" port of
your existing router.
10. Be sure that the Cat 5 Ethernet Cable that is plugged into the "WAN" Port of
your existing router is still plugged into your Cable/DSL Modem.
11. Unpack the Telephone Cable (black) that came with the DVG-1402S.
12. Attach one end of this cable to a standard analog telephone.
13. Attach the other end of this cable to phone
port "1" on the rear of the DVG-1402S.
14. Unpack the 12V DC Power Adapter that came with your DVG-1402S.
15. Connect the Power Adapter to the Power
Connecter on the DVG-1402S.
19