1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DVG-G1402S - Wireless Broadband VoIP Router
  6. Quick installation manual

D-Link dvg-g1402s Quick Installation Manual

Hide thumbs Also See for dvg-g1402s:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, User Manual
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.

Before You Begin

1.
If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service
Provider (ISP).
2.
It's best to use the same computer that is connected to your router for configuring the
DVG-G1402S Wireless VoIP Router. The DVG-G1402S acts as a DHCP server and
will assign all the necessary IP address information on your network. See the Quick
Installation Guide or the Manual on the CD-ROM for setting each network adapter to
automatically obtain an IP address.
Check Your Package Contents
If any of the above items is missing, please contact your reseller.
©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DVG-G1402S
Wireless VoIP Router
•
DVG-G1402S
shown with antenna
•
CD-ROM
containing Manual and Warranty
•

Ethernet Cable

(CAT5 UTP Straight-Through)
•
12V, 1.2A
Power Adapter
DVG-G1402S
Wireless VoIP Router
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.

Advertisement

Table of Contents
loading

Related Manuals for D-Link dvg-g1402s

Summary of Contents for D-Link dvg-g1402s

  • Page 1: Before You Begin

    If any of the above items is missing, please contact your reseller. ©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DVG-G1402S...

  • Page 2: Configure Ip Settings

    Power LED will turn ON to indicate proper operation. Insert one end of the Ethernet cable into an Ethernet (LAN) port on the back panel of the DVG-G1402S and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
  • Page 3 For Microsoft Windows XP Go to Start > select Settings > click Control Panel > Double-click on the Network Connections icon Double-click on Network Connections Right-click the Local Area Connection icon, and then select Properties. Select Properties...
  • Page 4 The dialog box displays a list of currently installed network items. Click Internet Protocol (TCP/IP) Click Properties Make the choice to get the IP settings assigned automatically. Select Obtain an IP address automatically Click...
  • Page 5 Connecting Additional Computers to the DVG-G1402S Wireless VoIP Router Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet- equipped computers to the LAN ports on the back panel of the DVG- G1402S. When you have completed the steps in this Quick Installation Guide,...

  • Page 6: Initial Web Configuration

    Initial Web Configuration Open your Web browser and type http://192.168.15.1 into the URL address box. Press Enter or Return. The login dialog box appears: When you first log in, the User name is admin the Password is also admin. These may be changed later.
  • Page 7 The Home window appears: Click Wizard. Clicking a hyperlink on the menu on the upper left side of the window brings up a detailed configuration window (see the next section for a brief description of three typical WAN connection examples).

  • Page 8: Configuring The Router Using The Setup Wizard

    Configuring the Router using the Setup Wizard The following screens are displayed when you click Run Wizard from the Web configuration Home page, as shown above. Included are typical WAN (Internet) connection examples for Dynamic IP Address (DHCP), Static IP Address, PPPoE connections.
  • Page 9 Click the Next button. Enter the Time Zone that corresponds to your location on the planet. Click Next to continue.
  • Page 10 Click the Next button. Enter the WLAN channel and SSID you want to use for your WLAN network. Initially, you can accept the default values and change the router’s configuration later. Click Next to continue.
  • Page 11 Click the Next button. Enter the Authorization Settings you want to use for your WLAN network. Initially, you can accept the default value (No Auth) and change the router’s configuration later. If you choose use Wireless encryption, click the WEP or WPA-PSK radio button to open the following screen.
  • Page 12 Click the Next button. WEP is for general use and utilizes a Shared Key between cooperating Wireless devices. WEP encrypts the data portion of each frame transmitted from the wireless adapter using one of the predefined keys. Decryption of the data contained in each packet can only be done if the both the receiver and transmitter have the same shared key.
  • Page 13 Click the Next button. WPA-PSK (Pre-Shared Key) uses the same encryption as WPA but is implemented differently. All devices on the wireless network share the same key (a Passphrase). Enter the Passphrase in the field above. Remember that each PC on your Wireless network will have to have identical Authorization Settings as the router to connect.
  • Page 14 Click the Next button. Enter a new password for the DVG-G1402S in the Password field. Confirm the new password by entering it again into the Verify Password field. Click the Next button to continue.
  • Page 15 Select Dynamic IP Address if your ISP automatically assigns you an IP address. This is the most common way of connecting the DVG-G1402S to another modem, such as a Cable modem. Select Static IP Address if your ISP provided you with IP address information that will not change.

  • Page 16: Dynamic Ip Address

    Dynamic IP Address Select Dynamic IP Address if your ISP automatically assigns you an IP address. This is the most common way of connecting the DVG-G1402S to another modem, such as a Cable modem. Click the Next button. Enter the host name, if required, in the Host Name field.
  • Page 17 Click the Restart button. Click the Restart button to save the settings and restart the router.

  • Page 18: Static Ip Address

    Static IP Address Select Static IP Address if your ISP provided you with IP address information that will not change. Click the Next button. Click the Next button to continue.
  • Page 19 Click the Next button. You will need your ISP to provide you with the IP address information about your Internet account, if your ISP statically assigns an IP address to you. Enter the provided IP address in the WAN IP Address field. Enter the corresponding subnet mask in the WAN Subnet Mask field.
  • Page 20 Click the Restart button. Click the Restart button to save the settings and restart the router.
  • Page 21 PPPoE Select PPPoE if your ISP uses the Point-to-Point over Ethernet (PPPoE) protocol to make the connection. This is the most common connection type for DSL users. Click the Next button. Click the Next button to continue.
  • Page 22 Click the Next button. Enter the User Name for your account in the User Name field. Enter the Password for your account in the Password field. Confirm the Password by entering it again in the Retype Password field. Click the Next button to continue.
  • Page 23 Click the Restart button. Click the Restart button to save the settings and restart the router.

  • Page 24: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link Australia 1 Giffnock Avenue, North Ryde, NSW 2113 Sydney, Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 Australia: 1300-766-868 New Zealand: 0800-900-900 URL: www.dlink.com.au www.dlink.co.nz E-MAIL: support@dlink.com.au info@dlink.com.au...

This manual is also suitable for:

Dvg-g1402s

Table of Contents