Getting Started (continued)
Connecting the DVG-1402S Behind a Router
If you wish to connect your DVG-1402S behind a router, follow the steps below.
After the steps are completed, your setup should look similar to the diagram
below.
1. Turn off your Computer.
2. Disconnect the power to the Cable/DSL Modem (unplug or turn off the power
switch).
3. Disconnect the power to your existing router (unplug or turn off the power
switch).
4. Unplug the existing Cat 5 Ethernet cable from the "LAN" port of your existing
Router.
5. Leave the other end of this cable attached to your PC.
18