D-Link DVG-1402S User Manual page 31

Web-based Management (continued)
Configure LAN Port > NAT Configuration > Dynamic NAT (continued)
The items on this
window are described
below:
Index - Choose the
index number that you
would like to edit (Form
1 to 6).
Global IP Start -
Enter the beginning
designated IP address
for the particular range
of packets you wish to
redirect to local
addresses.
Global IP End - Enter the end designated IP address for the particular range of
packets you wish to redirect to local addresses.
Local IP Start - Enter the beginning designated IP address for the particular
range of packets you wish to redirect to Global addresses.
Local IP End - Enter the end designated IP address for the particular range of
packets you wish to redirect to Global addresses.
State - This toggles Disable and Enable for the Dynamic NAT function.
Click Save to save the settings.
31