D-Link DVG-1402S User Manual page 9

Broadband phone service voip router
Hide thumbs Also See for DVG-1402S:
Table of Contents

Advertisement

Getting Started (continued)
Connecting the DVG-1402S Directly to a Modem and Computer
1. Turn off your Computer.
2. Disconnect the power to your Cable/DSL Modem (unplug or turn off the power
switch).
3. Unplug the existing Ethernet cable that is connected to your Cable/DSL Modem's
LAN or Ethernet port. Leave the other end of this cable attached to your PC.
4. Plug the Ethernet cable connector that you just removed from the modem into
one of the four LAN ports on the back of the DVG-1402S. The other end remains
attached to the PC.
5. Attach one end of the Ethernet Cable (blue) provided in this package to the
LAN or Ethernet Port on the Cable/DSL Modem.
6. Attach the other end of the provided Ethernet
Cable to the WAN Port of the DVG-1402S.
7. Attach one end of the provided phone cable (black) to a standard analog
telephone.
8. Attach the other end of the phone cable to the phone port labeled 1 on the
rear panel of the DVG-1402S.
9. Reconnect the power to the Cable/DSL Modem (plug in or turn on the power
switch).
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvg-1402s_l

Table of Contents