D-Link DVG-1402S User Manual page 34

Web-based Management (continued)
Configure LAN Port > RIP > Static Route Configuration (continued)
The items on this
window are described
below:
IP Address - Type in the IP Address of the subnet or device where packets are
routed.
Subnet Mask - Type in an appropriate subnet mask that allows the static
route to function.
Gateway - Type in the IP Address of the gateway used for traffic destined for
the specified subnet or device.
Interface - Select WAN or LAN Interface.
Metric - Type in the maximum number of hops allowed for the static route.
State - Enable or disable the route.
Click Save or Clear to Save or Clear the settings.
34