Connecting Audio Devices (Such As Cd Players) - Yamaha Aventage RX-A870 Owner's Manual

5
Use the Cursor keys (e/r) to select "AV1" (video input jack to be used) and
press the Cursor key (q).
6
Use the Cursor keys to select "Audio In" and press ENTER.
7
Use the Cursor keys to select "AUDIO5" (audio input jack to be used).
8
Press ON SCREEN.
This completes the necessary settings.
If you select "AV 1" as the input source by pressing AV 1, the video/audio played back on the
video device will be output from the unit.

Connecting audio devices (such as CD players)

Connect audio devices such as CD players, and a turntable to the unit. Depending on the audio
output jacks available on your audio device, choose one of the following connections.
Audio output jacks on audio device
Digital optical
Digital coaxial
Analog stereo
Turntable (PHONO)
The unit
AV 1-2 jacks
(rear)
AUDIO 1-5 jacks
TRIGGER OUT
12V 0.1A
HDMI ( )
HDCP2.2
HDMI OUT
IN
( )
HDCP2.2
1 2
2 1
OUT ARC (1 BD/DVD)
REMOTE
AUDIO 1 ANTENNA
(2 TV) ( 4 RADIO)
O
FM AM
OPTICAL
OPTICAL
AUDIO 2
PRE OUT
OPTICAL CENTER SUR. BACK
SINGLE
AUDIO 3
AV 1 AV 2
C
COAXIAL COMPONENT VIDEO VIDEO
COAXIAL
COAXIAL Y P B P R
ZONE OUT
FRONT
PHONO AUDIO 4 AUDIO 5
ZONE 2
GND
PHONO
L
GND
R
PHONO jacks
If you select the input source by pressing AV1-2, AUDIO1-5 or PHONO, the audio played back on
the audio device will be output from the unit.
When connecting a turntable
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
34
En
Audio input jacks on the unit
AUDIO 1 (OPTICAL)
AUDIO 2 (OPTICAL)
AV 1 (COAXIAL)
AUDIO 3 (COAXIAL)
AV 2 (AUDIO)
AUDIO 4-5 (AUDIO)
PHONO
Audio output
(either digital optical,
digital coaxial, or analog stereo)
O
OPTICAL
3 4
C
COAXIAL
L
SURROUND
L
R
SUBWOOFER
L
1 R
2
R
PHONO
L
L
R
R
GND
Ground lead
Audio output (PHONO)
Audio device
Turntable