Controlling Zone2 Or Zone3; Enjoying The Music In All Rooms - Yamaha RX-A2000 Owner's Manual

SOURCE RECEIVER
l

Controlling Zone2 or Zone3

AV The remote control can be used to select and control
1 2 3 4 4
Zone2 or Zone3 devices. The available operations are as
5 6 7 V-AUX
follows:
AUDIO d
1 2 3 4
• Selecting the input source of Zone2
PHONO MULTI USB NET
• Tuning into FM or AM when "TUNER" is selected as the
DOCK TUNER SIRIUS [ A ]
input source of Zone2
SCENE
e
1 2 3 4
• Tuning into SIRIUS Satellite Radio when "SIRIUS" is
selected as the input source of Zone2 or Zone3.
• Adjust the volume of Zone2 or Zone3 devices (when
connected via the built-in amplifier).
■
Activating the Zone2 or Zone3
operation mode
CZONE
Press to ZONE2 or ZONE3 before attempting
to use the remote control to control Zone2 or Zone3
devices.
■
w
PARTY Operating Zone2 or Zone3
CATEGORY
To enable and disable the audio output to Zone2
or Zone3
TUN./CH
lRECEIVER
Press
z
SLEEP
To select an input source for Zone2 or Zone3
dInput selector.
Press
C
ZONE
Only the following sources are available for
Zone2 or Zone3.
AV1-4 (only analog audio input), V-AUX (only
analog audio input), AUDIO1-4 (only analog audio
input), PHONO, USB, NET, DOCK, TUNER,
SIRIUS
To use SCENE function for Zone2 or Zone3
eSCENE
Press and hold
register the current setting to the scene.
eSCENE
Press
The following settings can be registered
for each scene of the Zone2 or Zone3.
Input, Master Volume, Tone Control
or
Zone3.
or Zone3.
A.
key for about 3 seconds to
key to load the registered setting.
To enable the sleep timer for Zone2 or Zone3
Automatically switch the Zone2 or Zone3 device to
standby mode after a specified period of time has elapsed
zSLEEP
(sleep timer). Press repeatedly to specify a
time for the sleep timer function.
120min. 90min.
Off 30min. 60min.
■
Adjusting Zone2 or Zone3 high-/
low-frequency sound (Tone
Control)
Press ZONE CONTROL on the front panel.
1
Press TONE/BALANCE on the front panel
2
repeatedly to select "Treble" or "Bass."
Press PROGRAM l / h to adjust the output
3
level in the applicable frequency range.
Adjustable range -10.0 dB to +10.0 dB
Adjustment 2.0 dB
increments
The display returns to the previous display soon after the
key is released.
■
Adjusting Zone2 and Zone3 front
speaker balance
1 Press ZONE CONTROL on the front panel.
Press TONE/BALANCE on the front panel
2
repeatedly to select "Balance."
Press PROGRAM l / h to adjust balance.
3
The display returns to the previous display soon after
the key is released.
SETUP
Enjoying the contents in another room
■
Controlling the content window on
the TV monitor in another room
When "Monitor Out Assign" is set to "Zone2" or
"Zone3," the following items can be set with Option
menu in the Zone2 or Zone3.
• Adjusting the Tone Control for the Zone2 or
• Setting the Repeat and Shuffle functions. (only when
selecting DOCK/PC/USB/Rhapsody)
NOTE
The Option menu in Zone2 or Zone3 can be
controlled with the same operation as for controlling
the Option menu for the main zone (☞p. 58).

Enjoying the music in all rooms

Use this feature to play main zone sources in other zones
simultaneously. This feature is useful when you want to
play back main sources as background music in a home
party, etc. When using the party mode, set "Party Mode
Set" to "Enable" (☞p. 122).
wPARTY
Press to turn on or off the party mode.
"Party Mode On" or "Party Mode Off" appears on the
front panel display or the TV screen.
While this unit is in the party mode, the PARTY
indicators turn on in the front panel display.
• Input audio signals are mixed down to 2ch Stereo and
output at the analog ZONE2 OUT or ZONE3 OUT
jacks.
• Party mode can be turned on only when the power of
main zone is turned on.
• Party mode automatically turns off when the power of
main zone is turned off.
En
Zone3.
149