Recording In Driving Mode; Continuous Recording; Event Recording - Mio MiVue 790 series User Manual

Recording in driving mode

Continuous recording

By default, the system will automatically begin with continuous recording in a few
seconds after start-up. The System indicator flashes in green and amber alternately
while the recording is in progress.
When continuous recording is in progress, you can manually stop recording by
pressing . Press
continuous recording automatically.
The recording may be divided into several video clips; recording will not stop
between video clips. The continuous recordings can be found in the "Video"
category for file playback.

Event recording

By default, if an event happens such as a sudden impact, high speed driving, an
aggressive turn or an accidental crash during continuous recording, the G sensor will
prompt the dash cam to start recording the event.
Note: You can change the sensitivity level of the G sensor by selecting
G-Sensor Sensitivity.
If you want to manually start an event recording while continuous recording is in
progress, press the Event button on the device.
The event recordings can be found in the "Event" category for file playback.
to return to the recording screen; the system will start
12
> Video Recording >