Mio MiVue 790 series User Manual page 20

installed in the car's tyres to monitor the air pressure via your MiVue dash cam.
You will receive alerts if the tyres are under (or over) inflated.
To configure the TPMS settings, press
Units: Sets the unit of the pressure (psi, Bar, kPa or kg/cm
l
(ºC or ºF).
Front Tyre Sensors: Sets the minimum/maximum pressure and maximum
l
temperature for the front tyres.
Rear Tyre Sensors: Sets the minimum/maximum pressure and maximum
l
temperature for the rear tyres.
Sensor Location: Sets the sensors' locations.
l
Learning Mode: When new TPMS sensors are installed, use this option for the
l
dash cam to detect the new sensors.
Note: For more information on installing and using TPMS, see the documentation that comes
with the product.
Driving Safety
l
The dash cam provides advanced driving safety functions to make your driving
safer.
Calibration: Follow the steps to calibrate the system.
l
1. Drive the vehicle in the middle of the lane.
2. Ask a passenger to select this option and then follow the on-screen
instructions to complete calibration.
Please adjust your device to
align the red line with the
horizon, and the green line
with the centre of the lane.
19
.
Please align the blue line with
the hood.
2
) and temperature