Recording In Driving Mode; Continuous Recording; Event Recording - Mio MiVue C570 Series User Manual

Select Manual, and the system will display the date and time setting screen.
l
Use /
step until all fields have been changed. When done, press

Recording in driving mode

Continuous recording

The system will automatically begin continuous recording in few seconds after start-
up. The System indicator flashes in green and amber alternately while the recording
is in progress.
When continuous recording is in progress, you can manually stop recording by
pressing . Press
continuous recording automatically.
The recording may be divided into several video clips; recording will not stop
between video clips. When your memory card fills up with continuous recordings, it
will automatically record over the oldest existing files in this category.
The continuous recordings can be found in the "Normal" category for file playback.

Event recording

By default, if an event happens such as a sudden impact, high speed driving, an
aggressive turn or an accidental crash during continuous recording, the G sensor will
prompt the dash cam to start recording the event.
Note: You can change the sensitivity level of the G sensor by selecting
G-Sensor Sensitivity.
The event recording will save moments before and moments after the event. When
your memory card fills up with event recordings, it will automatically record over the
oldest existing files in this category.
to adjust the value of the selected field; press
to return to the recording screen; the system will start
11
and repeat the
.
> Video Recording >