Mio MiVue 790 series User Manual page 23

EV: Sets the exposure level (-1 – +1) to adjust the brightness of the image.
l
The default setting is 0.
Frequency: Sets the frequency to match the flicker frequency of the local
l
power supply when recording.
G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
l
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
Stamps: Sets the information (Coordinates or G-Sensor) that will be
l
displayed on the recorded video.
Speed stamp: Displays the driving speed on the recorded video.
l
Text stamp: Displays customisable text information.
l
System
l
Allows you to change the system settings of the device.
Satellites: Displays the status of the GPS/GLONASS signal reception. You
l
can press
the need arises.
Date/Time: Sets the system date and time.
l
System Sound: Enables or disables system notification sounds.
l
Welcome Sound: Enables or disables the notification sounds during start-up.
l
Volume: Adjusts the volume level.
l
LCD Standby: Selects Always On to keep the LCD on; or sets the timer for
l
the LCD to turn off automatically (10 sec, 1 min or 3 min) after recording
starts. Selecting Standby will turn off the LCD (in specified time) but still
display the time and speed information.
Language: Sets the language.
l
Distance Unit: Sets the preferred distance unit.
l
and then select GPS or GLONASS for better signal reception if
22