Problem Solving Guide; Technical Problems - Miele PG 8083 SCVi Operating Instructions Manual

With the aid of the following guide, most minor problems can be corrected without
contacting Miele. In many cases this will save you time and money because you
won't need to book a service technician.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions. Please note:

Repairs must only be carried out by the Miele Professional Service, a Miele
authorised service agent or a suitably qualified technician in accordance with
local and national safety regulations. Unauthorised or incorrect repairs could be
dangerous and cause injury or damage to the appliance.

Technical problems

Problem
The dishwasher does
not start.
The dishwasher stops
during a programme.
After the programme
has started, the In-
operation indicator light
is not visible.
Possible cause and remedy
The door is not properly closed.
 Push the door firmly shut.
The dishwasher is not plugged in.
 Insert the plug and switch on at the socket.
The circuit breaker has tripped.
 Reset or replace the circuit breaker (see data plate
for minimum fuse rating).
The dishwasher is not switched on.
 Press the  button and select a programme.
The circuit breaker is defective or has tripped.
 Reset or replace the circuit breaker (see data plate
for minimum fuse rating).
 If the circuit breaker trips again, contact Miele
Professional Service.
The reflector panel was not correctly fitted.
 Refit the reflector panel correctly (see Installation
diagram).

Problem solving guide

53