Cleaning The Reflector Panel; Cleaning The Control Panel And Door Front - Miele PG 8083 SCVi Operating Instructions Manual

Cleaning the reflector panel

The reflector panel for the in-operation
indicator light is situated in the
coverplate underneath the worktop.
 The reflector panel should only be
wiped with a damp cloth or a suitable
cleaning agent designed for use on
plastic.
Cleaning the control panel and
door front

Remove any soiling immediately.
Soiling that is left too long might
become impossible to remove and
could cause external surfaces to alter
or discolour.
 The control panel should only be
wiped with a damp cloth.
 Clean the front with a soft sponge
and a solution of warm water and a
little washing-up liquid. Then dry with
a soft cloth.
A clean, damp microfibre cloth
without cleaning agent can also be
used.
Cleaning and care
To avoid damaging the
surfaces of the machine, do
not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing descaling
agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and brushes,
e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers,
– steam cleaning appliances.
49