Miele PG 8083 SCVi Operating Instructions Manual page 11


The electrical safety of this dishwasher can only be guaranteed
when continuity is complete between it and an effective earthing
system. If in any doubt, please have the electrical installation tested
by a qualified electrician. Miele cannot be held liable for the
consequences of an inadequate earthing system (e.g. electric
shock).

Please follow the advice on installation in these instructions and
the separate Installation diagram.

Before connecting the dishwasher, ensure that the connection
data on the data plate (voltage, frequency and fuse rating) match the
mains electrical supply.

There must be no electrical sockets behind the dishwasher. There
is a danger of overheating and risk of fire if the dishwasher were to
be pushed up against a plug. See "Electrical connection".

Do not connect the dishwasher to the mains electricity supply by
a multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).

Never open the casing of the appliance. Tampering with electrical
connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults.

The dishwasher must not be used if the electrical connection
cable is damaged. If the cable is damaged, it must be replaced with
a special cable available from Miele. For safety reasons, the
replacement must only be carried out by Miele Professional Service
or a qualified electrician.

This dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.

The plastic housing of the water connection contains two
electrical components. It must not be dipped in water.

There are electrical wires in the water inlet hose. Do not cut the
hose, even if it is too long.
Warning and Safety instructions
11