Rinse Aid; Buzzer - Miele PG 8083 SCVi Operating Instructions Manual

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set in
steps of approx. 0-6 ml.
The factory default setting is 3 ml.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
 Select the desired amount of rinse aid
and press the middle button to
confirm.
76

Buzzer

When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.
Buzzer at end of programme
The buzzer will sound four times at
short intervals at the end of a
programme. The buzzer will continue to
sound for up to an hour if you do not
switch the dishwasher off.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound four times in intervals without a
pause.
The buzzer which sounds when there
is a fault cannot be deactivated.
Setting the buzzer volume
There are seven different volume
settings. If no volume is selected, the
buzzer is deactivated.
 Select the desired volume and press
the middle button to confirm.