Interrupting A Programme; Changing A Programme - Miele PG 8083 SCVi Operating Instructions Manual

Operation

Interrupting a programme

Operation is interrupted as soon as the
door is opened.
If the door is closed again, the
programme will continue within a few
seconds from the point it was at before
the door was opened.

Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then raise the door
upwards until the catch engages.
44

Changing a programme

If the detergent dispenser flap has
already opened, more powder
detergent must be added for the new
programme unless liquid cleaning
agent is being dispensed.
If a programme has already started and
you wish to change it, proceed as
follows:
 Open the door.
 Switch the dishwasher off with the
 button.
 Switch the dishwasher back on with
the  button.
 Select the programme required with
the programme selector button.
 Start the programme by closing the
door.
The In-operation indicator comes on to
show that a programme has been
started.