Interrupting A Programme; Changing A Programme - Miele G 4263 VI Active Operating Instructions Manual

Table of Contents

Advertisement

Operation

Interrupting a programme

A programme is interrupted as soon as
the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely ne-
cessary and exercise extreme cau-
tion when doing so. Before closing
the door again, leave it ajar for ap-
prox. 20 seconds. This will enable
the temperature in the wash cabinet
to settle. Then raise the door up and
push until the catch engages.
46

Changing a programme

If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it, proceed as fol-
lows:
 Open the door.
 Switch the dishwasher off with the 
button.
 Switch the dishwasher on again with
the  button.
 Select the programme you want.
 Start the programme by closing the
door.

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 4268G 4292G 4297G 4263

Table of Contents