EcoWater ETF2300PF10 Owner's Manual page 18

ECOWATER
S Y S T E M S
SETTING MAXIMUM DAYS BETWEEN RECHARGES
When the filter's electronic control is first powered up, a
"wizard" screen prompts you to set the number of days
between automatic recharges (See Pages 10-12). To
change it:
1. From any of the rolling status screens, press the
SELECT ( ) button to display the Main menu.
2. Press the DOWN (6) button to scroll through the
menu options until Basic settings is highlighted
(See Figure 46).
Main menu
Recharge
Basic settings
User preferences
3. Press the SELECT ( ) button to display the Basic
settings menu (See Figure 47).
Basic settings
Current time
Max. days between rech...
Recharge time
4. Press the DOWN (6) button to scroll through the
menu options until Max. days between rech... is
highlighted.
5. Press the SELECT ( ) button to display the Max.
days between recharges screen (See Figure 48).
Max. days between
recharges
6. Press the UP (5) or DOWN (6) buttons to change
the number of days between automatic recharges.
The feature can be set from 1 to 99 days.
FIG. 46
FIG. 47
3 days
FIG. 48
No. of
People
1 - 2
1 - 2 4 days
3 4 days
4 - 5 3 days
6 - 7 2 days
Use the table above to determine the number of days
between recharges, based on the number of people
in the household and the iron ppm (parts per million)
in the water supply.
NOTE: If the water supply has high turbidity (sand, silt,
sediments, etc.) set to recharge more often than
the table shows.
7. Press the SELECT ( ) button. The display will go
back to the Basic settings menu (Figure 47).
8. Press the LEFT (3) button twice to return to the
rolling status screens
18
Filter Operation
Iron (parts per million)
3 - 4 5 - 7 8 - 20
3 days 2 days 1 day
3 days 1 day 1 day
2 days 1 day 1 day
1 day 1 day 1 day