Adjust Voltage And Frequency; Storage - Thermo Scientific Sorvall RC-4 Instruction Manual

2
Before Use

Adjust Voltage and Frequency

Adjust Voltage and Frequency
It is necessary that you set the voltage and frequency during setup.
1. Pull out the power supply plug.
2. Set the switches on the back as shown in the table.
3. Connect the centrifuge to the power supply again.

Storage

• Before storing the centrifuge and the accessories, it must be cleaned and if necessary, disinfected
and decontaminated.
• Store the centrifuge in a clean, dust-free location.
• Be sure to place the centrifuge on its feet.
• Avoid direct sunlight.
2-6
Sorvall RC-4
CAUTION Remove the power supply plug in order to prevent damage to the centrifuge.
Thermo Scientific