Removing The Optical (Cd/Dvd) Device - Clevo W241BU Service Manual

Disassembly

Removing the Optical (CD/DVD) Device

Figure 4
Optical Device
1. Turn off the computer, and remove the battery
Removal
2. Locate the RAM & CPU bay cover
3. Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.
a. Remove the screws.
4. Carefully disconnect the fan cable
b. Remove the cover.
5. Remove the screw at point
c. Remove the screw and
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
push the optical device
out off the computer at
screw holes should line up).
point 8.
7. Restart the computer to allow it to automatically detect the new device.
a.
b.

1. Component Bay Cover
9. Optical Device
• 5 Screws
2 - 8 Removing the Optical (CD/DVD) Device
(page 2 -
, and remove screws
1
, and remove the cover
6
, and use a screwdriver to carefully push out the optical device
7
2
3
1
4
5
6
5).
- .
2 5
.
1
c.
9
at point .
9 8
7
8