Operating The Auxiliary Port - Kubota K008-3 Operating Instructions Manual

The figure details the swing movement.

Operating the auxiliary port

Implements are operated using the auxiliary port.
Only implements approved by KUBOTA may be used. The implements must be operated in
accordance with the operating instructions supplied with them.
For auxiliary port specifications, see the "Specifications" section (page 32).
The auxiliary port pedal may only be activated when an implement is attached.

Connect the implement according to the corresponding
operating instructions at the supply connection "P" (1) and
the return flow connection "T" (2).
If the auxiliary port has not been in use over a long
period of time, dirt may have accumulated on the
pipe connections of the supply connection "P" (1).
Before installing the implement, drain approx. 0.1 L
of hydraulic oil at the supply connection "P".
Catch the drained hydraulic oil in a container and
discard it in accordance with the valid environ-
mental regulations.
The auxiliary port pedal (figure below, position 1) can be secured against inadvertent operation
by tilting it forward. When the auxiliary port pedal is not in use tilt it forward.
68
Operation