Figure 6-47 Telnet Login Instance - Zte ZXR10 5250 Series Configuration Manual

ZXR10 5250 Series Configuration Guide
Command
zte(cfg)#
ip-addr>
zte(cfg)#
show Telnet (for all configuration modes)
Telnet Configuration Instance
l
Configuration Description
See
the IP address of the PC is 192.168.1.100/24. The PC remotely logs in to the switch
through Telnet.

Figure 6-47 Telnet Login Instance

l
Configuration Procedure
1. Configure the switch
By default, the Telnet server function is enabled. You can use the following
command to make sure that the function is enabled.
zte(cfg)#show Telnet
2. Configure the PC
SJ-20131111172707-002|2013-11-27 (R1.0)
telnet <dest ip-addr> destination-port <port-num><src
set telnet listen-port <port>
Figure 6-47, a switch has a layer-3 port with the IP address 192.168.1.1/24, and
Telnet server is enable
Telnet server is listening on port 23
6-52
ZTE Proprietary and Confidential
Function
Sets the port number and source
IP address when the device is
used as a Telnet client to log in to
another device.
Sets the listening port number
when the device is logged in to
through Telnet. The value is 23 or
between 1025 and 49151.
Displays the Telnet configuration
and status.