Figure 5-16 Layer 2 Protocol Transparent Transmission Configuration Topology - Zte ZXR10 5250 Series Configuration Manual

Protocol Number
0x21
Configuring Layer 2 Protocol Transparent Transmission
The configuration of layer-2 protocol transparent transmission includes the following
commands:
Command
zte(cfg)#
show l2pt (all configuration modes)
Layer 2 Protocol Transparent Transmission Configuration Instance
l
Configuration Description
Set the LACP transparent transmission function of L2pt of Switch 1 to implement the
link aggregation between Switch 2 and Switch 3. The configuration increases the link
bandwidth and realizes a redundant backup. See

Figure 5-16 Layer 2 Protocol Transparent Transmission Configuration Topology

l Configuration Procedure
zte(cfg)#set l2pt 0x02 enable
zte(cfg)#set vlan 100 enable
zte(cfg)#set vlan 100 add port 1, 3
zte(cfg)#set port 1,3 pvid 100
zte(cfg)#set vlan 200 enable
zte(cfg)#set vlan 200 add port 2, 4
zte(cfg)#set port 2,4 pvid 200
SJ-20131111172707-002|2013-11-27 (R1.0)
set l2pt <protocol-list>{enable | disable | invalid}
Chapter 5 Service Configuration
Protocol
GVRP
Figure
5-63
ZTE Proprietary and Confidential
Function
Enables or disables L2pt
transparent transmission function.
Displays the configuration of L2pt
transparent transmission.
5-16.