Web - Zte ZXR10 5250 Series Configuration Manual

Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
off
zte(cfg)#
packet-sample on frequency <2-16000000>[time-range
<word>]
zte(cfg)#
zte(cfg)#
zte(cfg)#
show sFlow (all configuration modes)

6.8 Web

Web Management Overview
The ZXR10 5250 provides an embedded Web server stored in the Flash memory, which
allows users to use a standard Web browser (it is recommended to use IE6.0 above and
1024×768 resolution) for managing the remote switch.
Configuring System Login
On the condition that Web connection has been configured on the switch.
1. Open Microsoft Internet Explorer.
2. Enter the IP address of the switch in the address bar (this address is that switch can
connect). The system login interface is displayed, see
SJ-20131111172707-002|2013-11-27 (R1.0)
set sFlow version<number>
set sFlow {ingress | egress}{enable | disable}
set sflow {ingress | egress} port <portlist> packet-sample
set sflow {ingress | egress} port <portlist>
set sFlow ingress sample-mode {all | forward}
clear sflow config [{agent | collector}]
clear sFlow statistic
6-29
ZTE Proprietary and Confidential
Chapter 6 Management
Function
Sets a format version of sFlow
sampling packets.
Enables or disables the
ingress/egress sFlow function.
Disables sFlow sampling on a port
or ports.
Enables sFlow sampling based
on ports, or binds a time range to
ports.
Sets the sFlow ingress sampling
mode.
Deletes sFlow configuration on
ports.
Clears sFlow port sampling
statistics.
Displays sFlow configuration
information.
Figure 6-19.