Figure 5-13 Qos Configuration Instance - Zte ZXR10 5250 Series Configuration Manual

ZXR10 5250 Series Configuration Guide
Command
zte(cfg)#
zte(cfg)#
show qos policer [<0-383>] (all configuration modes)
show qos policy-counter [<0-1023>] (all configuration modes)
show qos policer-counter [<0-383>] (all configuration modes)
show policy [mirror | redirect | statistics | policing [<0-383>]|
vlan-remark | remark | harddrop] (all configuration modes)
zte(cfg)#
QoS Configuration Instance
l Configuration Description
Use the 5250–28TC as an example, set the uplink bandwidth of all the user-interface
to 2Mbps. The uplink bandwidth of the switch is 20Mbps. The uplink port is port 26
and the client PC accesses the network through port 24. See

Figure 5-13 QoS Configuration Instance

l Configuration Procedure
zte(cfg)#set qos traffic-limit ge-port 1 data-rate 2000
zte(cfg)#set qos traffic-limit ge-port 2 data-rate 2000
/*Omitted*/
SJ-20131111172707-002|2013-11-27 (R1.0)
clear qos policer-counter <counterlist>
clear qos policer <0-383>
set icmp protect {enable|disable}
5-58
ZTE Proprietary and Confidential
Function
Clears the flow policer statistics
value.
Clears the flow policer
configuration.
Displays the flow policer
configuration.
Displays the counter value of the
specified flow.
Displays the flow policer statistics
value.
Displays various binding
configuration of the specified
flow.
Sets the ICMP protection function.
Figure 5-13.