Accessories - Leica Rugby 840 User Manual

13
Accessories for
power supply
Rugby 840, Accessories

Accessories

A100 - Li-Ion Charger (790417)
The A100 Li-Ion charger comes complete with four separate AC adaptors.
A130 - 12 Volt Battery Cable (790418)
The A130 12 volt battery cable connects the Rugby to a standard 12 volt automotive
battery as a backup for the unit's battery. It is only usable with the rechargeable
battery pack. Length: 4 metres/13 feet.
A140 - Car Adapter Cable (797750)
The A140 car adapter cable connects the Rugby to a standard automotive accessory
jack as a backup for the unit's battery or to charge in a vehicle. It is only usable with
a rechargeable battery pack. Length: 2 metres/6.5 feet.
A150 - Alkaline Battery Pack (790419)
The A150 alkaline battery pack is included as part of the standard alkaline package. It
can also be purchased separately to be used as a backup for rechargeable models.
Batteries required: Four D-cell type alkaline.
A170 - Solar Panel Kit (807479)
The A170 solar panel kit runs and charges the Rugby. It is usable only with a recharge-
able battery pack. The A170 solar panel comes complete with its own storage bag that
can be attached directly to the Rugby carrying case.
A800 - Li-Ion Battery Pack (790416)
The A800 Li-Ion battery pack is included as part of the standard rechargeable package.
It can also be purchased separately as an upgrade to the alkaline battery pack. It is
necessary to also purchase the A100, Li-Ion battery charger to complete the Li-Ion
battery solution.
A200 - Wall Mount Bracket (790421)
The A200 wall mount bracket mounts the Rugby 840 securely to the ceiling grid for
suspended ceiling installations.
A210 - Ceiling Grid Target (732791)
The A210 ceiling grid target attached magnetically to the ceiling grid for suspended
ceilings installations.
A220 - Batter Board Clamp with Adapter (790432)
The A220 batter board clamp and adapter provides the user with a simple, string free
set up on batter boards. The 90° receiver adapter attaches to the main clamp for easy
storage when not being used. Refer to "5.4.4 Batter Boards" for specific application
information.
A280 - Facade Adapter Kit (799204)
The A280 facade adapter kit provides the user with a useful setup for facade installa-
tions. The kit consists of two facade adapter brackets and a batter board clamp with
the 90° receiver adapter. Refer to "5.4.5 Facades" for specific application information.
58