Kyocera KM-2550 Service Manual page 134

2FT
Section Jam code
Paper 22
conveying
section
23
24
Transfer 30
section
Fixing 40
section
41
42
43
44
45
Exit section 50
51
*: Optional.
1-5-4
Description
Multiple sheets in the
drawer 2 (first paper
feeder)
Multiple sheets in the
drawer 3* (second paper
feeder)
Multiple sheets in the
drawer 4* (third paper
feeder)
Misfeed in registration/
transfer section
Misfeed in the fixing
section (paper feed from
bypass tray)
Misfeed in the fixing
section (paper feed from
drawer)
Misfeed in the fixing
section (paper feed from
first paper feeder)
Misfeed in the fixing
section (paper feed from
second paper feeder*)
Misfeed in the fixing
section (paper feed from
third paper feeder*)
Misfeed in the fixing
section (paper feed from
duplex section*)
Misfeed in the exit section
Misfeed in the job
separator*
The registration switch (RSW) does not turn off within 4976 ms
of registration switch (RSW) turning on.
The registration switch (RSW) does not turn off within 2189 ms
of drawer paper feed clutch 1 (DPFCL1) turning on.
The drawer feed switch 1 (DFSW1) does not turn off within
4976 ms of drawer feed switch 1 (DFSW1) turning on.
The drawer feed switch 1 (DFSW1) does not turn off within
1961 ms of drawer paper feed clutch 2 (DPFCL2)* turning on.
The drawer feed switch 2 (DFSW2)* does not turn off within
4976 ms of drawer feed switch 2 (DFSW2)* turning on.
The drawer feed switch 2 (DFSW2)* does not turn off within
1961 ms of drawer paper feed clutch 3 (DPFCL3)* turning on.
The registration switch (RSW) does not turn off within 1843 ms
of drawer feed switch 1 (DFSW1) turning on.
The registration switch (RSW) does not turn off within 1843 ms
of drawer feed switch 1 (DFSW1) turning off.
The registration switch (RSW) does not turn off within 1386 ms
of duplex paper conveying switch (DUPPCSW1)* turning on.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn off within 2378 ms of the
registration switch (RSW) turning off.
The exit switch (ESW) does not turn on within 2378 ms of the
registration motor (RM) turning on.
The job separator eject switch (JBESW)* does not turn on
within 1614 ms of feedshift switch (FSSW) turning on.
The job separator eject switch (JBESW)* does not turn off
within 1614 ms of feedshift switch (FSSW) turning off.
The job separator eject switch (JBESW)* does not turn off
within 1614 ms of feedshift switch (FSSW) turning off.
Conditions