Kyocera KM-2550 Service Manual page 64

2FT
Attach the alphabet labels.
30. Take the alphabet labels from the one-touch
label sheet, and adhere them above the cor-
responding numeric keys on the operation
panel after wiping the panel with alcohol.
In Asia and Oceania, use the PQRS TUV
WXYZ label, and do not use the PRS TUV
WXZ and OPER labels.
Attach the certification label (120 V specifications
only).
31. Adhere the FCC68 label onto the shield
cover after wiping the cover with alcohol.
Execute the maintenance mode.
After installation is complete, the fax control PCB
must be initialized by executing the maintenance
mode U601/U602.
(See the service manual of the fax system.)
1-3-42
Alphabet labels
Figure 1-3-84
Shield cover
Figure 1-3-85
FCC68 label