Kyocera KM-2550 Service Manual page 180

2FT
6. Remove the springs, stop ring and bushing
and then the shaft holder from the upper
paper feed unit.
7. Remove the drawer forwarding pulley from
the upper paper feed unit.
8. Remove the drawer paper feed pulley from
the upper paper feed unit.
9. Replace the drawer forwarding pulley and
drawer paper feed pulley and refit all the
removed parts.
1-6-10
Spring
Upper paper feed unit
Figure 1-6-15
Drawer forwarding pulley
Figure 1-6-16
Shaft holder
Spring
Stop ring
Bushing
Drawer paper feed pulley